Default Configuration Values


In order to help get Webulator/400 configured, a default set of configuration values is assumed. The following values will be used unless they are overridden by the current session entry or one of its parent session entries.

Background Color

The default Background Color is "Blank". This means that there will be no background color used. This value can be changed by setting the BACKCOLOR parameter through option 2 of the WRKWBLSSN command.

Background Image

The default Background Image is "Blank". This means that there will be no background image used. This value can be changed by setting the BACKIMAGE parameter through option 2 of the WRKWBLSSN command.

Buttons with keyboard plugin

The default Buttons with Keyboard Plugin value is No. This means that the defined virtual keyboards buttons will not be shown when using the keyboard plugin. This value can be changed by setting the KBDPLUGBTN parameter through option 2 of the WRKWBLSSN command.

Color Conversion

The default Color Conversion are as follows:
     White       #FFFFFF
     Green       #00BF00
     Red         #E50000
     Turquoise   #00BFBF
     Yellow      #E5E500
     Pink        #E500E5
     Blue        #0000E5
     Monochrome
These values can be changed by setting the COLORCONV parameter through option 2 of the WRKWBLSSN command.

Extended Input Fields

The default Extended Input Fields is Scrollable . This value can be changed by setting the EXTFIELDS parameter through option 2 of the WRKWBLSSN command.

Field Level Prompting

The default Field Level Prompting is ?. This value can be changed by setting the FLDPROMPT parameter through option 2 of the WRKWBLSSN command.

Font Size

The default Font Sizeis 3. This means that the current browser font size will be used. This value can be changed by setting the FONTSIZE parameter through option 2 of the WRKWBLSSN command.

Footer File

The default Footer File is "Blank". This means that the standard Webulator/400 footer will be used. This value can be changed by setting the FOOTFILE parameter through option 2 of the WRKWBLSSN command.

Header File

The default Header File is "Blank". This means that the standard Webulator/400 header will be used. This value can be changed by setting the HEADFILE parameter through option 2 of the WRKWBLSSN command.

Horizontal Rules

The default Horizontal Rules is None. This means that there will be no horizontal rules drawn between the top and bottom sets of AS/400 virtual keyboard buttons and the 5250 screen data. This value can be changed by setting the HORIZRULE parameter through option 2 of the WRKWBLSSN command.

Input Inhibited Timeout

The default Input Inhibited Timeout is 5 minutes. This value can be changed by setting the INPINHTIME parameter through option 2 of the WRKWBLSSN command.

Keyboard Plugin

The default Enable Keyboard Plugin value is Yes. This means that the keyboard plugin will be used to map the user's keyboard similar to the AS/400's keyboard so that Enter and all function keys can work properly. This value can be changed by setting the KBDPLUGIN parameter through option 2 of the WRKWBLSSN command.

Light Pen Image

The default Light Pen Image is /icons/ltpen.gif . This is an image of a small red circle. This value can be changed by setting the LIGHTPEN parameter through option 2 of the WRKWBLSSN command.

Menu Type

The default Menu Type is None. This value can be changed by setting the MENUTYPE parameter through option 2 of the WRKWBLSSN command.

Parsed Buttons

The default Parsed Buttons is"Blank". This means that there will be no keywords parsed in the screen text and converted to browser submit buttons. This value can be changed through option 8 of the WRKWBLSSN command.

Reverse Image Space Replacement Character

The default Reverse Image Space Replacement Character is '*'. This means that all spaces that have an attribute of reverse image will be shown as an *. This value can be changed by setting the RICHAR parameter through option 2 of the WRKWBLSSN command.

Send JavaScript

The default Send JavaScript value is *YES. This means that the session will take advantage of functionality written in JavaScript to make the session better emulate a 5250 session. This value can be changed by setting the SNDJAVASCR parameter through option 2 of the WRKWBLSSN command. Please see the JavaScript Usability Enhancements for more information concerning the use of JavaScript.

Show Blank Lines

The default Show Blank Lines value is Yes. This means that you will see all blanks lines on the AS/400 screen. This value can be changed by setting the SHOWBLINE parameter through option 2 of the WRKWBLSSN command.

Signon Method

The default Signon Method is Disabled. This is the only configuration entry that must be overridden in a session entry before a URL is accessible. This value is disabled because of the potential security issues associated with the other available Signon Methods. This value can be changed by setting the SIGNON parameter through option 2 of the WRKWBLSSN command.

Signoff Action

The default Signoff Action is SignonScreen. This means that the user will be shown a signon screen whenever they sign off the system. This value can be changed by setting the TERMSIGNOF parameter through option 2 of the WRKWBLSSN command.

Subfile scrolling support

The default Subfile scrolling support value is None. This means that you will not see any clickable image buttons whenever an output field is found on line 24 or a subfile has been indentified on the screen. This value can be changed by setting the SFLSCROLL parameter through option 2 of the WRKWBLSSN command.

Tables Enabled

The default Tables Enabled value is Disabled. This value can be changed by setting the TABENABLE parameter through option 2 of the WRKWBLSSN command. Please see the Preformatted Text or HTML Tables for more information concerning the use of HTML tables.

Table Font Name

The default Table Font Name value is "Courier". This value can be changed by setting the TABFONT parameter through option 2 of the WRKWBLSSN command. This value will be ignored if the Tables Enabled value is Disabled. Please see the Preformatted Text or HTML Tables for more information concerning the use of HTML tables.

Table Width

The default Table Width value is "Blank". This value can be changed by setting the TABWIDTH parameter through option 2 of the WRKWBLSSN command. This value will be ignored if the Tables Enabled value is Disabled. Please see the Preformatted Text or HTML Tables for more information concerning the use of HTML tables.

Terminal Color

The default Terminal Color is Color. This value can be changed by setting the TERMCOLOR parameter through option 2 of the WRKWBLSSN command.

Terminal Size

The default Terminal Size is Small. This value can be changed by setting the TERMCOLOR parameter through option 2 of the WRKWBLSSN command.

Terminal Timeout

The default Terminal Timeout is 5 minutes. This value can be changed by setting the TERMTIME parameter through option 2 of the WRKWBLSSN command.

Termination Confirmation

The default Termination Confirmation is Yes. This value can be changed by setting the CONFIRM parameter through option 2 of the WRKWBLSSN command.

Termination URL

The default Termination URL is / Return to server home page. This value can be changed by setting the TERMURL parameter through option 2 of the WRKWBLSSN command.

Upper to lower conversion

The default Upper to lower conversion is No. This means that all data will be shown as it was sent from the AS/400 application. This value can be changed by setting the UPTOLOWERC parameter through option 2 of the WRKWBLSSN command.

Virtual Terminal Device CCSID

The default Virtual Terminal Device CCSID value is NoConvert. This means that CCSID associated with the device is the same CCSID as the one associate with the server user profile. This value can be changed by setting the VTDEVCCSID parameter through option 2 of the WRKWBLSSN command.

Virtual Terminal Job CCSID

The default Virtual Terminal Job CCSID value is NoConvert. This means that CCSID associated with the interactive job is the same CCSID as the one associate with the server user profile. This value can be changed by setting the VTJOBCCSID parameter through option 2 of the WRKWBLSSN command.

Virtual Keyboard Buttons

There will be four AS/400 Virtual Keyboard Rows defined. There will be one at the top of the screen and three at the bottom of the screen. These values can be changed through option 9 of the WRKWBLSSN command.

The first row at the top of the screen will have the following buttons.

The first row at the bottom of the screen will have the following buttons.

The second row at the bottom of the screen will have the following buttons

The last row at the bottom of the screen will have the following buttons.

The following AS/400 Virtual Keyboard Buttons are not used in the default configuration :

Related AS/400 Commands